Securely install electrical appliances for the bathroom

Securely install electrical appliances for the bathroom

Safety is the most important factor when installing electrical appliances in the bathroom, because this is a wet area, which is more likely to cause electrical accidents. Please advice how to install electrical system in bathroom safe, effective.
Wiring:
Should be hidden in the wall, avoid the line often contact with water, resulting in rapid deterioration; avoiding direct contact with the user can be dangerous.
- Wires should be protected in the gene tube by fire, explosion, waterproof, insulating material.
- The underground power line in the wall should have a specific design diagram and be kept for a long time, facilitating the repair of electricity and water, upgrading and installation of equipment later.
Sockets:
- Do not install a socket in the bathroom. If a shaver outlet is required, place it in a high, dry place, away from the tub, shower, or use a safety-lugged outlet to prevent water from coming in.
Lamps in the bathroom:
Lights:
- Use protective ceiling light, to avoid contact with water. Do not use hanging lamps.
- Install in a high position, outside the reach of the user.
Heating lamp:
- Make sure the light is about 50 cm away from the reach.
- Do not put the firelight near inflammable items such as toilet paper, towels, towels ...
- Switches (both lights and lights) should be designed outside the bathroom.
Water Heater:
- Need to select the power saving function, safe, anti-leakage.
- Place a fixed wall, 1.5 m from the floor and 2 m from the bath, to avoid heat loss along the pipe.
- Ensure around 50 cm of non-obstructing objects, facilitate maintenance.
- Use a conductor of size suitable for the pot capacity, because if the conductor is overloaded, it will lead to melting, causing short circuit.
- The ground connection must be made when installing the jar into the home electrical network.
- Install the aptomat of the pot outside the bathroom.
Ventilators:
- Should be installed on the ceiling of the bathroom, making the circulation, air exchange much more effective than the wall; Also installed in the middle of the bath and toilet area, to increase ventilation.
- Should choose the type of plastic fan, with thermal sensors, automatically disconnect when the fan is too hot.